Baotn Oil Lubrication System Centralized Lubrication PLC Grease Pump Progressive Type Lubrication Pump

Home » Products » Progressive Centralized Grease Lubrication System » Electric Grease Lubrication Pump » Baotn Oil Lubrication System Centralized Lubrication PLC Grease Pump Progressive Type Lubrication Pump

Share to:

Baotn Oil Lubrication System Centralized Lubrication PLC Grease Pump Progressive Type Lubrication Pump

The GTB-C1 grease lubrication pump is controlled by the host PLC or an independent controller to control the working cycle of the lubrication pump. Model GTB is a gear pump lubricated with grease. The system is equipped with a liquid level switch, and a pressure switch can be selected as required. When the oil volume or pressure is insufficient, an abnormal signal can be sent out. The GTB oil injection machine is equipped with a relief valve to protect the oil injection machine and pipelines from damage due to excessive pressure. GTB electric lubricators are widely used in various centralized lubrication systems such as machine tools, plastic machinery, and die-casting machines.

Availability:

Quantity:



Inquire Add to Basket

Model:
GTB-C1

Product Description

Product Advantage

1. The operation and interval time of GTB-C1 are controlled by PLC.

2. GTB-C1 is equipped with a pressure gauge, allowing users to easily check the working pressure.

3. GTB-C1 has a normally closed pressure switch that automatically detects the working pressure and sends a signal when the pressure is lower than the preset value.

4. GTB-C1 has a liquid level switch and a pressure switch, which can automatically detect the oil level and pressure, and send out a signal when the oil level is low or the pressure is insufficient.

5. GTB-C1 is equipped with a refueling button Feed key, which can be used as a manual refueling and forced lubrication.

6. GTB-C1 is equipped with an internal fuse to prevent excessive current from burning out the IC board and motor due to short circuit.

Technical Parameters

Models	GTB-C1
voltage(V)	AC220v DC24v
Power(w)	60 / 35
Lubricating time(S)	Shall be connectecto the PLC system
Intermittent time(M)	Shall be connectecto the PLC system
throughout caliber(mm)	Φ6
Rated discharge pressure (MPa)	2
Maximum discharge pressure	6
Throughout(cc/min)	200
Pressure Switch	Yes
grease sensor	Optional
Beeper	No
Oil tank volume(L)	3L/4L

Product Uses

GTB electric oil injection machine is widely used in various centralized lubrication systems such as machine tools, plastic machinery, and die-casting machines.